Minerador de criptomoedas BZminer. Baixar BZ miner
Último lançamento
Release v21.1.5 of BzMiner. All feedback is welcome ;)
-- What's in this release (v21.1.5)
x New Coin: aidepin
x New Coin: aipg
x Warthog: Optimized and fixed some stability issues
x Warthog: Fixed crashing from previous beta
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: Fixed CPUs showing up as GPU
x Dynex: Fixed crashes every hour or so
x New option: warthog_cache_config
default is 0
x New option: warthog_max_ram_gb
is now a decimal
x New option: disable_cpu_metrics
set this to true if you experience crashing at startup
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize
x NOTE: Please reset all warthog_verus_hr_target configs
https://www.bzminer.com/releases/v21.1.5/
Be sure to check out the config generator if having trouble setting up
https://www.bzminer.com/config-generator/
Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA
--- Dynex Notes ---
- Fine tuning dynex_pow_ratio will likely give you better results than default settings
- intensity option will adjust how much vram is allowed to be used
- Intel ARC support still only for POW
-- dynex_pow_ratio -- Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.
-
This is an array of values, one for each gpu
-
In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]
-
In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0
-
In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"
-
A value of 0.0 will mine ONLY POUW
-
A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW
-
A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW
-
A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely
-
A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW
-
A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!
-- Dynex intensity -- The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)
-- Known Issues
- AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
- Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
- If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
- Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
- If Nvidia memory temps are not showing, please update to latest nvidia driver
- Nexa is not working on Intel currently
NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner
Minerstat update command:
export version="21.1.5"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart
MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)
export version="21.1.5" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi
Hive OS Update Command (assuming currently on v21.1.1)
wget https://bzminer.com/downloads/bzminer_v21.1.5_linux.tar.gz; tar -xvf bzminer_v21.1.5_linux.tar.gz; miner stop; cp bzminer_v21.1.5_linux/bzminer /hive/miners/bzminer/21.1.1/; miner start
Rave OS Update Command (assuming currently on v21.1.1)
stop && wget https://bzminer.com/downloads/bzminer_v21.1.5_linux.tar.gz && tar -xvf bzminer_v21.1.5_linux.tar.gz && cp -adpR bzminer_v21.1.5_linux/bzminer /app-data/miners/bzminer-21.1.1 && start
Checksums
bzminer_v21.1.5_windows.zip:
MD5: 10519ca7dec8ec40374b41cddf0ab812 SHA256: 36e4759099cd7e42875c4b0b00f2e9b23b530cae8c56d351ec262f723131dcf6
bzminer_v21.1.5_linux.tar.gz:
MD5: 6221a36c29dee64cab29e5641131b296 SHA256: d6ecb7bb78fd91947a384982f2d20097f4934080a422120107b13210c5204fa7
Exemplos de arquivos .bat Bzminer
EthereumPOW (ETHW)
Ethereum Classic (ETC)
Kaspa (KAS)
Ergo (ERG)
NEXA
Ravencoin (RVN)
Meowcoin (MEWC)
Alephium (ALPH)
Radiant (RXD)
EthereumPOW + Alephium Dual Mining
EthereumFair + Alephium Dual Mining
Ethereum Classic + Alephium Dual Mining
EthereumPOW + Alephium + ZIL Triple Mining
EthereumFair + Alephium + ZIL Triple Mining
Ethereum Classic + Alephium + ZIL Triple Mining
EthereumPOW + Kaspa Dual Mining
EthereumFair + Kaspa Dual Mining
Ethereum Classic + Kaspa Dual Mining
EthereumPOW + Kaspa + ZIL Triple Mining
EthereumFair + Kaspa + ZIL Triple Mining
Ethereum Classic + Kaspa + ZIL Triple Mining
EthereumPOW + Radiant Dual Mining
EthereumFair + Radiant Dual Mining
Ethereum Classic + Radiant Dual Mining
EthereumPOW + Radiant + ZIL Triple Mining
EthereumFair + Radiant + ZIL Triple Mining
Ethereum Classic + Radiant + ZIL Triple Mining
Configurando Bzminer
Comandos básicos do minerador Bzminer
--disable desativa a mineração das placas de vídeo especificadas. Um espaço é usado como um separador. Use o ID do dispositivo no formato pci_bus:pci_device (por exemplo --disable 1:0 3:0). Use o comando --devices para encontrar os IDs dos dispositivos. No HiveOS, esse parâmetro é definido no arquivo add. configuração;
-w este campo especifica o endereço de sua carteira ou o endereço da conta no pool;
--w2 para especificar o segundo endereço se você minerar em modo duplo;
--pool_password, --pool_password2 senha, use x por padrão;
-w, --worker, --worker2 nome do trabalhador (rig ). Ele é definido como um parâmetro separado ou por meio de um ponto após o endereço da carteira;
--cpu-priority o nível de utilização da CPU durante a mineração em uma placa de vídeo. O padrão é 2. Se o processador não puxar, você pode definir 0. O valor máximo é 5;
--reconnect-on-fail-shares reconecta o minerador ao pool no caso de receber compartilhamentos rejeitados do pool;
--nvidia 1mine apenas em dispositivos Nvidia;
--amd 1mine apenas em dispositivos AMD;
-h, --help imprime todos os comandos disponíveis.
Overclock no minerador Bzminer
--oc_lock_memory_clock Bloqueia o valor de overclock na memória. Você também pode definir valores diferentes para placas de vídeo separados por um espaço;
--oc_core_clock_offset define a frequência do clock do núcleo da placa de vídeo em MHz. Um valor separado por espaço pode ser especificado para várias placas;
--oc_memory_clock_offset define a frequência de memória da placa gráfica em MHz. Você pode especificar um valor para várias placas por meio de um espaço;
--oc_power_limit especificando o limite de energia (consumo da placa de vídeo), em watts. Através de um espaço, você pode especificar um valor único para cada cartão. Por exemplo --oc_power_limit 140 150 160 150.
Erros típicos ao usar um minerador Bz miner
Comissões (porcentagem de desenvolvedores)
ERG - 0,5%
ETC - 0,5%
RVN - 0,5%
ALPH - 0,5%
API Bzminer
--http_port define a porta. A porta padrão é 4014.